Masonry Construction & Restoration

Masonry Construction & Restoration Experts Since 1980's.
Fully Insured.

We serve Vancouver, Surrey, Langley, West Vancouver, North Vancouver, Burnaby, Coquitlam, New Westminster, Abbotsford, Maple Ridge, Chilliwack, Mission, entire Lower Mainland and Fraser Valley. We have expertise in repairing leaky chimneys, numerous homes, commercial projects, fireplace and more.

We are experts when it comes to new masonry construction or restoration, specializing in brick, concrete and stone. For over 25 years we have been successful with our projects in driveways, concrete sidewalks, stonework, concrete forming, cement work, and brickwork always far exceeding the standards, ensuring the highest level of quality.

Call Now: 604-679-7648


Nickel Masonry & Construction are experts in masonry restoration. We have the experience and knowledge in brick masonry structures, restoring the structural integrity of a masonry or heritage building, as well as refurbishing old buildings brick facades protecting its heritage value. We understand the different methods used to restore a 150 year old building with that of one half its age and take great pride in our masonry restoration process with safety and value of the building or structure in mind.

Call For A Free Estimate: 604-679-7648


Weather-damaged lining systems, flue obstructions and loose masonry materials all present a threat to residents. Regular chimney maintenance is essential to prevent damage, deterioration and future high-cost chimney repairs. While most stone is not affected by water penetration, large amounts of mortar are required to bond the stone together properly. Therefore, a stone chimney – just like a brick chimney – should be protected from the effects of water penetration. Click here to read more information about Water-proofing chimney.

Call For A Free Estimate: 604-679-7648


When these masonry chimneys go bad (and they all go bad) the repair can be very expensive. Call up a chimney contractor to see what can be done about it.


Line chimneys with stainless steel or aluminum.
Liners made from aluminum or stainless steel are a relatively easy way of making unlined chimneys useable again. Aluminum can be used with some gas-burning appliances, but stainless steel is the right choice when wood or oil is the fuel.
Liners are either flexible or rigid, but in an old house whose chimneys take lots of twists and turns flexible pipe will be a lot easier to install. It’s pulled through the existing chimney to create an airtight (read that safe) passage for smoke and other exhaust gases.


Flashing refers to thin pieces of impervious material installed to prevent the passage of water into a structure from a joint or as part of a weather resistant barrier (WRB) system. The origin of flash and flashing are uncertain but these words are related to a pool of water and the word splash. Click here to read more about Chimney Flashings.

Call For A Free Estimate: 604-679-7648


Repointing is the process of renewing the pointing (the external part of mortar joints) in masonry construction. Over time, weathering and decay cause voids in the joints between masonry units (usually bricks), allowing the undesirable entrance of water. Water entering through these voids can cause significant damage through frost weathering and from salt dissolution and deposition. Repointing is also called pointing, or pointing up, although these terms more properly refer to the finishing step in new construction. Click here to read more on chimney repointing.

Call For A Free Estimate: 604-679-7648


At Nickel Masonry & Construction, we take great caution and follow the standards to ensure quality of the finished job. When handling concrete jobs, here are the steps that any contractor should keep into consideration.

Call For A Free Estimate: 604-679-7648


We are experts when it comes to new masonry construction or restoration. For over 25 years we have been successful with our stonework projects in driveways, sidewalks, patios, decks and garden landscaping, stonework, always far exceeding the standards, ensuring the highest level of quality.


Nickel Masonry and Construction is certified to provide top tier repairs for residential and commercial properties. Specializing in brick, concrete and stone for your fireplace, chimney, siding and more.

Offering 25 years of experience, we are well priced, efficient, and deliver high quality craftsmanship for all your construction needs. If it’s cracked, rotten, leaking, or broken we will fix it. Your call is sways welcome and we stand behind our reliability, service, and results. We have successfully completed several home renovation projects. We offer a wide range of home repair services including: Decks, Carpentry ,Siding, Concrete Forming, Interior Repairs, Re-Roofing, Roof Repairs, Stonework, Blockwork, Cultured Stone.